IELTS Writing – Cement Making
IELTS Writing Task 1 Academic – Cement Making
Source: Cambridge IELTS 08 Test 03.
The diagrams below show the stages and equipment used in the cement-making process, and how cement is used to produce concrete for building purposes.
Summarise the information by selecting and reporting the main features, and make comparisons where relevant.Summarise the information by selecting and reporting the main features, and make comparisons where relevant. Write at least 150 words.
Write at least 150 words.
IELTS Writing Task 1 Academic – Cement Making: Analysis
Data: Multiple diagram
Timeline: Present
Vocabulary
– Stages – steps
– Equipment – machinery
– Cement making
IELTS Writing Task 1 Academic – Cement Making V.1.1
Paragraph 01 – Introduction and Overview / Paragraph 02 – Cement Production / Paragraph 03 – Concrete Production
The first diagram delineates the various stages in cement production, while the second illustrates the process of concrete production for construction. Overall, cement creation involves four major steps, whereas concrete only requires two.
To initiate the cement production process, two-thirds of limestone and one-third clay are required. Initially, they will be pulverized using a crusher and subsequently fed into a large canister for mixing. Following this, the mixture undergoes heating in a rotating heater using a flame as the heat source, resulting in a melted blend of limestone and clay. Subsequently, using a grinder, these melted minerals are further ground into fine particles, culminating in cement ready for packaging.
In the case of concrete production, half of the mixture comprises gravel (small stones), followed by a quarter of sand, a tenth of water, and the remaining portion is cement. All these minerals are then placed in a device known as a concrete mixer, where they undergo thorough mixing until they are ready for use in construction purposes. (167 Words)
IELTS Writing Task 1 Academic – Cement Making V.1.2
The first diagram explains the different stages in cement production, while the second illustrates the production of concrete for construction. Overall, cement creation involves four major steps, whereas concrete only requires two.
To create a batch of cement, two-thirds of limestone and one-third clay are needed. They will be pulverized using a crusher and then fed into a large canister for mixing. Afterward, the mixture will be heated in a rotating heater using a flame as the heat source, creating a melted blend of limestone and clay. Using a grinder, these melted minerals will be further ground into fine particles, resulting in cement ready for packaging.
For a batch of concrete, half of the mixture consists of gravel (small stones), followed by a quarter of sand, a tenth of water, and the remaining portion is cement. All these minerals will be placed in a device called a concrete mixer, where they will be thoroughly mixed until ready for use in construction purposes. (162 Words)
Check Educatorian and IELTS Rizz
Check Tasks 2
